- Three kinds of actions are fundamental to the manipulation of objects:
initialization, finalization, and assignment. Every object is initialized,
either explicitly or by default, after being created (for example, by an
object_declaration or allocator). Every object is finalized before being
destroyed (for example, by leaving a subprogram_body containing an object_declaration, or by a call to an instance of Unchecked_Deallocation). An
assignment operation is used as part of assignment_statements, explicit
initialization, parameter passing, and other operations.
- Default definitions for these three fundamental operations are provided
by the language, but a controlled type gives the user additional control over
parts of these operations. In particular, the user can define, for a
controlled type, an Initialize procedure which is invoked immediately after
the normal default initialization of a controlled object, a Finalize
procedure which is invoked immediately before finalization of any of the
components of a controlled object, and an Adjust procedure which is invoked
as the last step of an assignment to a (nonlimited) controlled object.
- The following language-defined library package exists:
package Ada.Finalization is
type Controlled is abstract tagged private;
procedure Initialize(Object : in out Controlled);
procedure Adjust (Object : in out Controlled);
procedure Finalize (Object : in out Controlled);
type Limited_Controlled is abstract tagged limited private;
procedure Initialize(Object : in out Limited_Controlled);
procedure Finalize (Object : in out Limited_Controlled);
... -- not specified by the language
- A controlled type is a descendant of Controlled or Limited_Controlled.
The (default) implementations of Initialize, Adjust, and Finalize have no
effect. The predefined "=" operator of type Controlled always returns True,
since this operator is incorporated into the implementation of the predefined
equality operator of types derived from Controlled, as explained in 4.5.2.
The type Limited_Controlled is like Controlled, except that it is limited and
it lacks the primitive subprogram Adjust.
- During the elaboration of an object_declaration, for every controlled
subcomponent of the object that is not assigned an initial value (as defined
in 3.3.1), Initialize is called on that subcomponent. Similarly, if the
object as a whole is controlled and is not assigned an initial value,
Initialize is called on the object. The same applies to the evaluation of an
allocator, as explained in 4.8.
- For an extension_aggregate whose ancestor_part is a subtype_mark,
Initialize is called on all controlled subcomponents of the ancestor part; if
the type of the ancestor part is itself controlled, the Initialize procedure
of the ancestor type is called, unless that Initialize procedure is abstract.
- Initialize and other initialization operations are done in an arbitrary
order, except as follows. Initialize is applied to an object after
initialization of its subcomponents, if any (including both implicit
initialization and Initialize calls). If an object has a component with an
access discriminant constrained by a per-object expression, Initialize is
applied to this component after any components that do not have such
discriminants. For an object with several components with such a
discriminant, Initialize is applied to them in order of their component_declarations. For an allocator, any task activations follow all calls on
- When a target object with any controlled parts is assigned a value,
either when created or in a subsequent assignment_statement, the assignment
operation proceeds as follows:
- The value of the target becomes the assigned value.
- The value of the target is adjusted.
- To adjust the value of a (nonlimited) composite object, the values of
the components of the object are first adjusted in an arbitrary order, and
then, if the object is controlled, Adjust is called. Adjusting the value of
an elementary object has no effect, nor does adjusting the value of a
composite object with no controlled parts.
- For an assignment_statement, after the name and expression have been
evaluated, and any conversion (including constraint checking) has been done,
an anonymous object is created, and the value is assigned into it; that is,
the assignment operation is applied. (Assignment includes value adjustment.)
The target of the assignment_statement is then finalized. The value of the
anonymous object is then assigned into the target of the assignment_statement. Finally, the anonymous object is finalized. As explained below,
the implementation may eliminate the intermediate anonymous object, so this
description subsumes the one given in 5.2, ``Assignment Statements''.
- An implementation is allowed to relax the above rules (for nonlimited
controlled types) in the following ways:
- For an assignment_statement that assigns to an object the value
of that same object, the implementation need not do anything.
- For an assignment_statement for a noncontrolled type, the
implementation may finalize and assign each component of the
variable separately (rather than finalizing the entire variable
and assigning the entire new value) unless a discriminant of the
variable is changed by the assignment.
- For an aggregate or function call whose value is assigned into a
target object, the implementation need not create a separate
anonymous object if it can safely create the value of the
aggregate or function call directly in the target object.
Similarly, for an assignment_statement, the implementation need
not create an anonymous object if the value being assigned is the
result of evaluating a name denoting an object (the source
object) whose storage cannot overlap with the target. If the
source object might overlap with the target object, then the
implementation can avoid the need for an intermediary anonymous
object by exercising one of the above permissions and perform the
assignment one component at a time (for an overlapping array
assignment), or not at all (for an assignment where the target
and the source of the assignment are the same object). Even if
an anonymous object is created, the implementation may move its
value to the target object as part of the assignment without
re-adjusting so long as the anonymous object has no aliased
- Completion and Finalization
-- Email comments, additions, corrections, gripes, kudos, etc. to:
Page last generated: 95-03-12